log file captured from the STUART (115200,n81) (TP440/TP441) while running ramldr/pst usb_host_init() stab 1 usb_host_init() stab 2 XsUsbHostSetupGpio(): GPDR0=F3A90610 GPDR1=FF878AD7 GPDR2=00C67FFF GPDR3=01900F81 GAFR0_U=F0C0740A GAFR1_U=AAAD3A48 GAFR2_U=A5A6AF44 GAFR3_U=0000145D UP3OCR=00000002 Xs_HW_setup () stab 1 Xs_HW_setup () stab 2 Xs_HW_setup () stab 3 USBOHCIRegP=4C000000 &uhchr=4C000064 uhchr =00000626 uhchr disab p3=00000E24 uhchr enab p3=00000624 after set PPS port3 & disable port2 &uhchr=4C000064 uhchr =00000604 Xs_HW_setup () stab 4 HW setup enable port 3 HW setup CKEN=0059F7FF usb_host_init() stab 3 -->XsUsbHostInitialize() hccaP=0xA0F00000 after offset hccaP=0xA0F00100 hccap=0xA0F00100 hcp=0x4C000000 bufList=0xA0F00200 edListP=0xA0F01200 periodicTableP=0xA0F01400 tdListP=0xA0F01C00 tdIsoListP=0xA0F03D00 bufAllocP=0xA0F04500 host_bp_in_buf=0xA0F04510 deviceTable=0xA0228410 Waiting for Controller to become operational ... Controller is operational Disable Root Hub power port 3 reg addr =4C00005C Enable Root Hub power usb_host_init() stab 4 before for port change uhchr=0x00000604 root port change port 1=0x00000000 root port change port 2=0x00000000 root port change port 3=0x00010101 root port change UHCSTAT =0x00000000 root port change UHCRHDA=0x14001102 root port change UHCRHDB=0x000E0000 root port change UHCHCON=0x00000680 root port change UHCRHS=0x00000000 root port change port addr=0xCC03B6C4 root port change uhchr=0x00000604 root port change port 1=0x00000000 root port change port 2=0x00000000 root port change port 3=0x00010101 root port change UHCSTAT =0x00000000 root port change UHCRHDA=0x14001102 root port change UHCRHDB=0x000E0000 root port change UHCHCON=0x00000680 root port change UHCRHS=0x00000000 root port change port addr=0x4C00005C changed port=2 Port is connected No.=2 Endpoint max packet set =8 config ep & Set to configuration 1 ok get product info: S Flash Neptune LTEBULK IN max size=16 enum bp cost loop times=0 stab 3 stab 5 stab 6 main, before loop UDCCR=0x00000803 UP2OCR=0x020000A0 UDCICR0=0x000003FF UDCICR1=0xA8000000 UDCISR0=0x00000000 UDCISR1=0x00000000 UDCCSR0=0x00000000 UDCCRA=0x0200D103 UDCCRB=0x02014103 UDCCRC=0x02035103 UDCCRD=0x0203C103 CKEN=0x0059FFFF ----end dump---- ep7_done: ep7 len=0